Doremi DC-POST Uživatelský manuál Strana 1

D C - P o s tDIGITAL CINEMA SERVERUser ManualVersion 1.2The English version of this document is the only legally binding version. Translated versions

2.3 Software and Firmware UpgradeSoftware and Firmware upgrades are provided by Doremi Labs. Doremi will provide you with the necessary software and

25.2 Menu Controls and Jog/Shuttle IN: Select the In point for a video segment. OUT: Se

JOG/SHUTTLE WHEEL FUNCTIONS: Activates the following function when lit:JOG: In Jog mode, the rotation of the Internal wheel will generate "Jog&q

3 Ingesting Content3.1 Ingesting ContentThe ingest GUI will only show items that can be supported by DC-Post (e.g. text documents, pictures, power-p

Figure 10: Ingest Graphical User Interface (GUI)DPT.OM.001128.DRM Page 12 of 101

4 Ingest Phase4.1 Ingesting content form a USB DriveIf the content to ingest is on a USB drive, plug the drive into the DC-Post's USB Port and

4.2 Ingesting Content from a Remote Doremi Server/LMS4.2.1 File Transfer Protocol (FTP)You must use a File Transfer Protocol connection to ingest an

Figure 13: Ingest Graphical User Interface (GUI)Figure 14: Ingest GUI-- Contents from Doremi Remote ServerDPT.OM.001128.DRM

4.3 Ingest ProgressThe DC-Post allows you to ingest content while the server is ingesting previously selected content. Click on the “Monitor” tab to

4.4 PngestThe Pngest feature is available when you are ingesting content over a Doremi remote server or LMS.Note: The Pgnest feature is available onl

Figure 16: “Pgnest Prompt” WindowFigure 17: “Pngest Progress” WindowDPT.OM.001128.DRM Page 18 of 101

Note: The “Total Progress” bar indicates the progress of the CPL Ingest, while the “Copying Asset” barindicates the progress of the individual compone

Table of Contents1 INTRODUCTION...

5 Show Management With CineListerCineLister is software that manages the DC-Post and will automatically appear when the DC-Post is connected.CineList

Figure 21: CineLister GUI – Editor Tab• The “Editor” tab is composed of two different parts:◦ The left pane displays all of the content (e.g. feature

6 Show PlaylistsA Show Playlist (SPL) is a succession of Compositions (CPL's), Automation Cues and Trigger Cues. SPL's make up the chain of

Figure 23: CineLister's Editor Tab - Audio/Video Icons6.2 Show Playlist CreationThe CineLister user interface allows the user to create their o

Figure 24: CineLister Graphical User Interface (GUI) – “Editor” TabDPT.OM.001128.DRM Page 24 of 101

Figure 25: CineLister GUI – Editor Tab6.2.2 Re-Ordering ElementsUsing the up and down arrows, each element can be moved to the top or to the bottom o

6.3 Refresh ButtonAnytime a new content and or package is ingested into the server, these items will not be displayed automatically in the CineLister

6.5 Export Show PlaylistYou can save and export a Show Playlist to a USB drive or other drive that the server supports.• Go to the CineLister Editor

6.6 Import Show PlaylistYou can import a Show Playlist from a USB drive or any other drive that the server supports.• Go to the CineLister Editor tab

7 Element Properties7.1 Viewing the “Properties” Elements• Select the element from the right side of the GUI.• Either “double click” on the selected

9.2 DELETING A SHOW PLAYLIST...3710 AUTOMATION

7.2 Unencrypted CPL'sIf the element you have selected is an Unencrypted CPL, the following properties window will appear:Figure 33: “Composition

7.3 Encrypted CPL with KDM Valid for more than 48 HoursIf the element you have selected is an encrypted CPL, the following “Properties” window will

7.4 Encrypted CPL with KDM Valid for Less than 48 HoursIf the element you have selected is encrypted and the KDM is available BUT will expire in less

7.5 How to delete a CPL from the server• Select the CPL on the left part of the Editor tab GUI.• Click on the “Delete content” button.Note: The “Dele

8 Play 2D Content in 3D Mode8.1 3D Mode Set UpYou can play 2D content within 3D Shows without having to generate a stereoscopic version of the 2D co

Figure 38: “Show Playlist Properties- 2D/3D Mode drop-down” WindowFigure 39: CineLister GUI – Editor TabDPT.OM.001128.DRM

9 Accessing a Show Playlist• Click on the Open button from the CineLister Editor tab (see Figure 40).• You will then be prompted to Figure 41 below.

9.1 Editing an Existing Show Playlist• Click on the Open button from the CineLister Editor tab (see Figure 40).• You will be prompted to the“SPL&apos

10 Automation CuesAn Automation Cue is an action/demand that is sent from the DC-Post to any external device connected to the DC-Post for the purpose

Figure 44: Macro Automation Cue Name10.2 Editing a Macro Automation Cue• To remove a Macro Automation Cue, select it in the “Macro Editor” window and

16 DEVICE MANAGER CONFIGURATION...7516.1 ADDING A PROJECTOR...

Figure 46: “Save Changes” Window10.3 Inserting Actions into Macro Cues• Go to the CineLister “Menu,” click “Doremi Labs” and select “Macro Editor”.• C

10.4 Actions Explained• Delay: delay the macro execution for a specific duration.• General Purpose Output: change the position of a GPO line.• Projec

Figure 49: GPO Set Up Window10.5.2 Playback Action Insertion• Click the “Playback Actions” button in the “Action” window (see Figure 47).• You will

10.5.4 Dowser Action InsertionFrom the “Action” window choose the “Projector” setting (see Figure 47). Next, choose the name of the projector from th

10.6 Automation Library UsageSupport for theater automation control is provided.Note: See Section “Automation Libraries Management” below for instruct

Figure 55: Library Containing Actions-eCNAFigure 56: “Send a Message” WindowDPT.OM.001128.DRM Page 45 of 101

11 Adding Macro Cues to a Show Playlist11.1 How to add a Macro Cue to an SPL• If you have not already done so, please see the Section “Macro Creation

Figure 58: CineLister GUI – Editor TabDPT.OM.001128.DRM Page 47 of 101

11.2 Editing the Actions11.2.1 To change the order of Actions• Use the up and down arrows to change the order of the actions in the Macro Automation

12 Trigger CueA “Trigger Cue” allows for the execution of a Macro Automation Cue upon the occurrence of an event from an external device using a “Sign

Software License AgreementThe software license agreement can be found at the following location:http://www.doremilabs.com/support/cinema-support/cinem

12.2 Trigger Cue Creation12.3 How to create a new Trigger Cue• From the “Macro Editor “ GUI, click on the “Trigger Cue” tab (see Figure 60).• Click th

Figure 62: Trigger Cue Defined12.4 Connecting a Trigger Cue to an Event12.4.1 Connecting a Trigger Cue to a GPI event• Click the “Connect to an event

Figure 63: “Events” WindowFigure 64: Connection to a GPI Event• Click the “Save” button when you are done. It is very important to click the save butt

Note: The “...” button will prompt you to the “Signal Library” feature (see Figure 65). The “Signal Library” has a list of additional signals that are

Figure 67: Signal Library GUI12.5 Trigger Cue SavingWhen you click the “Save” button, you will be prompted to a window asking you for a password.Enter

13 Adding a Trigger Cue to a Show Playlist• Go to the CineLister GUI from the Menu.• From the “Editor” tab select a Trigger Cue on the left part of th

Figure 70: CineListerDPT.OM.001128.DRM Page 56 of 101

13.1 Adding a Trigger Cue for One Element of the Show PlaylistHow to Add a Trigger Cue for only one Element of the SPL: Go to the CineLister GUI Edit

Figure 72: CineLister GUI – Playback TabFigure 73: “Empty Show Playlist” Window13.3 Playback ProgressThe SPL progress list-box displays the order o

Figure 74: Show Playlist Progress List-BoxFigure 75: CineLister GUI – Playback TabDPT.OM.001128.DRM Page 59

1 Introduction1.1 PurposeThis manual is intended for use with the DC-Post. This manual will explain how to ingest content usingthe CineLister softwa

13.4 Pause Mode13.4.1 Pause Mode Functions• Use the Pause button to pause the playback. Note: Clicking the Stop button will eject the SPL. • Use the

13.5 Adjust the Value of the Fast Forward and Rewind Functions• From the Menu go to System, then to Terminal.• You will be prompted to the Terminal wi

Figure 78: Xedit WindowDPT.OM.001128.DRM Page 62 of 101

13.6 Playback of a Live EventBy connecting a Doremi MPEG Streamer to the DC-Post you can play a live event. You can create a Show Playlist for the liv

Figure 79: CineLister GUI – SPL with Live EventDPT.OM.001128.DRM Page 64 of 101

13.9 Playback Lock ModeThe Mode button can be used to lock the playback of a CPL or SPL in order to avoid an accidental interruption of the show. To l

13.10 Playback Alert MessagesCineLister displays Alert messages in the Playback tab. There are currently two alerts available:1. "Projector comm

14 CineLister's Schedule Tab14.1 Schedule Tab OverviewThe “Schedule” tab allows you to schedule the playback of Show Playlists on a certain day a

Figure 85: Show Playlist Setting WindowFigure 86: Schedule Tab after Playlist AdditionDPT.OM.001128.DRM Page

14.2 Schedule Playback MessagesScheduled Show will Start (Time Message)If you are playing a show in the “Playback” tab and there is a time conflict w

2 DC-Post PresentationThe DC-Post is a high quality DCI JPEG-2000 server capable of playing movie and trailer packages inMXF format.The unit features

Scheduled Show did not startIf you get an error message saying “The scheduled Show below did not start as expected,” this can bedue to several reasons

14.3 Show Playlist RemovalTo delete a Show Playlist from the schedule.• Go to the CineLister Schedule tab.• Click on the SPL you want to remove in the

14.4 Playback Recovery Due to Power FailureIf a power failure occurs during a scheduled playback, a playback recovery will be possible after having po

14.6 Shutting Down During a PlaybackWhen you have a playback in progress and you try to “shutdown” the server, you will be prompted to aconfirmation w

15 Virtual Keyboard• Go to CineLister Menu.• Select Virtual Keyboard.• The keyboard will appear on the GUI.• You can use the keyboard with a stylus pe

16 Device Manager ConfigurationThe Device Manager is a graphical user interface (GUI) used to setup the connection between the DC-Post and cinema proj

16.1 Adding a Projector• Click the “Add” button from Figure 95 above.• You will be prompted to the “Device Selection” Window (see Figure 96).• Select

Figure 97: Device Manager GUI – Projector Fields16.2 Removing a ProjectorTo remove a projector, click on its name on the left part of the Device Manag

17 Automation Libraries ManagementSupport for theater automation control is also provided. The list of currently supported devices is the following:

17.2 eCNA Device RemovalTo remove the eCNA device, select it in the left pane of the Device Manager and click the “Delete” button (see Figure 98).17.3

2.1 Launching DC-Post's CineListerIf you have not already installed a Hard Disk Drive to the DC-Post, please see the “Hard Disk Drive Installati

17.5 Raw Device AdditionA “Raw” device allows for easy communication with an external device across an Ethernet connection using Raw data formatted as

17.6 Raw Device RemovalTo remove the Raw device, click on it in the left part of the Device Manager GUI and click the “Delete” button (see Figure 100)

18 Time AdjustmentCAUTION: The following hardware time adjustment feature is only available for Dolphin DCI-based units. You can identify such unit by

Figure 102: "Control Panel" WindowFigure 103: "Time Setting" WindowDPT.OM.001128.DRM Pag

19 Using the RCV2 for Variable Speed PlaybackPlease see the attached document “RCV2 Controller” for installation procedures and general information.JO

20 Authoring20.1 OverviewCPL Authoring is a software based on a Graphical User Interface (GUI). This software allows the user to edit the “Z Position”

20.2 CPL Authoring UsageIn order to use the CPL Authoring feature, you must first ingest the CPL that contains the XML subtitle file. Once the CPL is

• Next, go to the “Playback” tab and press “Play” to load the CPL (see Figure 106).• Once the CPL is loaded from the “Playback” tab, you will then see

Figure 107:DPT.OM.001128.DRM Page 88 of 101 Version 1.

20.3 Navigation ButtonsThe navigation buttons allow control of the playback of the loaded CPL, like the CineLister Playback tab does. To locate within

2.2 PasswordsYou will be prompted to enter a password for various tasks when using CineLister. Your administrator determines the level of security.No

20.4 Subtitle XML File AreaThe CPL Authoring GUI displays the XML Subtitle Spot on the left and its associated features on the right.• Double-clicking

Adjust the Z-Offset value using the “- -” or “+ +” button in the window as presented below:Figure 110:Note: To revert the Z-Offset value to its orig

Figure 112:• To save the Z-Offset changes made, click the “Save” button. Note that this will NOT modify the original XML Subtitle file, it will create

21 AcronymsTerm DefinitionGPI General Purpose InputGPO General Purpose OutputKDM Key Delivery MessageSPL Show Play List2D Non-stereoscopic3D Stereosco

22 Document Revision HistoryDate Version Description04/30/2010 1.0 First Version.07/20/2012 1.1 Logo updated and contact information added.05/13/2014

23 RCV2 Remote ControllerRCV2Remote ControllerDPT.OM.001128.DRM Page 95 of 101

WARNINGTHIS APPARATUS MUST BE EARTHEDIMPORTANTWARNINGPower requirements for electrical equipment vary from area to area. Please ensure that your RCV2

PROTECTING YOURSELF AND THE DC-POST• Never touch the AC plug with wet hands.• Always disconnect the RCV2 from the power supply by pulling on the plug,

C A U T I O NR I S K O F E L E C T R I C S H O C KD O N O T O P E N !C A U T I O N : T O R E D U C E T H E R I S K O F

24 RCV2 ConnectionConnect the AC receptacle to the back of the RCV2 and then connect to an AC outlet. Connect the blue cable that ships with the RCV2